Static & Dynamic Analysis of Open Coil Helical Spring used in Two Wheeler Application

Authors

  • Vikas Shakya M.E. Scholar, Department of Mechanical Engineering, SATI Vidisha
  • Dr, P.L. Verma Professor, Department of Mechanical Engineering, SATI Vidisha
  • Dr. Pankaj Agarwal Professor, Department of Mechanical Engineering, SATI Vidisha
  • Anil Chourasia Professor, Department of Mechanical Engineering, LNCT Bhopal

Keywords:

Suspension, Open coil spring, Carbon fiber

Abstract

In this paper suspension spring of a 160cc 2-wheeler is analyzed and ptimized for its performance. For this study the diameter and the material of the coil ire for suspension is changed and its effect is noted. In this study three materials ere studied that is ASTM A227 hard drawn spring steel material, carbon fibre aterial and titanium alloy. The results were obtained for all of these materials and ased on the results it can be said that spring made of carbon fibre material gives the est results. The springs were tested under both static as well as dynamic loading, and n all of the tests Carbon fibre spring proved to be best.

References

Dhiraj V. Shevale, Niranjan. D. Khaire., Review sson Failure Analysis of Helical Compression Spring, 2016.

“Finite Element Analysis Of Helical Coil Compression Spring For Three Wheeler Automotive Front

Suspension”, Tausif M. Mulla1, Sunil J. Kadam2, Vaibhav S. Kengar3 (Ijmie) Issn No. 2231 –6477, Vol-2, Iss3, 2012.

Art of Fatigue Analysis Of Helical Compression Spring Used In Two-Wheeler Horn International Journal Of

Mechanical Engineering And Technology (IJMET), ISSN 0976 – 6340(Print), ISSN 0976 – 6359(Online)

Volume 4, Issue 2, March - April (2013) © IAEME.

Chapter 22 / Materials Selection And Design Considerations.

Investigation Of Probable Failure Position In Helical Compression Springs Used In Fuel Injection System Of

Diesel Engines”, Brita Pyttel,K K Ray, Isabell Brunner, Abhishek Tiwari, S. A. Kaoua.

Design Of Helical Coil Compression Spring” A Review P.S.Valsange / International Journal Of Engineering

Research And Applications (Ijera) Issn: 2248 -9622 Www.Ijera.Com Vol. 2, Issue 6, November - December

, Pp. 513 -522.

“Review On Development And Analysis Of Helical Spring With Combination Of Conventional And Composite

Materials “,International Journal Of Engineering Research And General Science Volume 3, Issue 2 , March -

April, 2015 ISSN 2091-2730.

Associated spring, Design Handbook: Engineering Guide to spring design. Associated spring, Bernes Group

Inc., Bristol, Conn., 1987.

P. C. Sharma and D. K Aggarwal. “Machine Design”, S. K Kataria& sons – Delhi; Revised edition

Downloads

Published

2024-05-15

How to Cite

Shakya, V., Verma, D. P., Agarwal, D. P., & Chourasia, A. (2024). Static & Dynamic Analysis of Open Coil Helical Spring used in Two Wheeler Application. Innovative Research Thoughts, 4(3), 5–13. Retrieved from https://irt.shodhsagar.com/index.php/j/article/view/528

Issue

Vol. 4 No. 3 (2018): Volume 4 | Issue 3 | January-March 2018

Section

Articles

License

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.